OUTSIDE HEATING, INC.

"The oldest and one of the largest distributors of outside wood burning boilers!"
 20 YEARS IN THE BUSINESS!

FAN COIL UNIT

Hardy Fan Coil Now homes without existing ductwork can enjoy all the advantages of an Outside Wood burning Furnace. Heating your home with a Fan Coil Unit removes the fire hazard, wood trash, smoke and ashes from your home.

How does the Fan Coil Unit heat your home?

Outside wood burning furnaces heat water to approximately 170-180 degrees F. The hot water is then pumped through underground hot water pipes to the hot water coil in the Fan Coil Unit in your home. The fan in the unit forces air through the hot water coil, sending hot air into the area to be heated.

 

spacer.gif (815 bytes)
Thermostat Controls
The temperature of your home is regulated by a thermostat mounted on a 115 volt electrical receptacle located adjacent to the Fan Coil Unit. The thermostat turns the fan off and on based on heat demand. The thermostat can turn the hot water pump located on your outside wood burning stove off and on if the transformer option is utilized. The Fan Coil Unit has adjustable fan speeds (Lo, Med, Hi) for different rates of output. It is recommended that the unit be located central to the area to be heated.

spacer.gif (815 bytes)
spacer.gif (815 bytes)
Fan Coil Unit
SPECIFICATIONS

Fan Unit - Standard box fan covering full area of hot water coil to give an efficient heat exchange with quiet operation.
spacer.gif (815 bytes)
Hot Water Coil - Made from copper tube expanded into aluminum fins designed to given optimum heat exchange. (Rated at 60,000 BTU capacity)
spacer.gif (815 bytes)
Controls - Has receptacle mounted room thermostat to maintain the comfort zone required. The fan has 3 speeds (Lo, Med, Hi) for the degree of output desired.
spacer.gif (815 bytes)
Filter - The filter is a standard 20"x20"x1" replaceable type.
spacer.gif (815 bytes)
Construction - The cabinet that houses the fan unit, the hot water coil and controls is made from 3/4" cabinet quality wood with a stained wood grain exterior.
spacer.gif (815 bytes)
Plumbing Connections - Supply and return water connections are 3/4" pipe fittings concealed in rear right side to allow easy access.
spacer.gif (815 bytes)
Electrical Requirements - 115 volt grounded outlet.
spacer.gif (815 bytes)
Installation - Locate central to area to be heated, near a 115 volt grounded outlet. Allow for entry of 3/4" hot water pipes connected to your outside wood burning furnace.
spacer.gif (815 bytes)
Optional - Can include a mount transformer to turn the circular pump on your outside wood burning furnace off and on when heat is called for by the room thermostat. This will require thermostat wire run to the pump relay on your outside wood burning furnace.

Call Outside Heating, Inc. for current pricing.

 

ABOUT US

 WHY HAVE AN OUTDOOR WOOD FURNACE? HOW IT WORKS MODELS PARTS
Same Day Shipping!